AVS 59th Annual International Symposium and Exhibition
    Vacuum Technology Monday Sessions

Session VT-MoM
Vacuum Gauging and Metrology

Monday, October 29, 2012, 8:20 am, Room 14
Moderator: G.A. Brucker, Brooks Automation, Inc., Granville-Phillips Products


  Click here to Download program book for this session  
  in Adobe Acrobat format  

Click a paper to see the details. Presenters are shown in bold type.

8:20am VT-MoM1
Sapphire-based Capacitance Diaphragm Vacuum Gauge Operating at 500 oC
T. Ishihara, H. Tochigi, J. Yoshinaga, M. Nagata, Azbil Corporation, Japan
8:40am VT-MoM2
On the Stability of Capacitance Diaphragm Gauges
M. Wüest, C. Strietzel, INFICON Ltd, Liechtenstein
9:00am VT-MoM3 Invited Paper
A Truly Cold Vacuum Gauge for Ultra–high Vacuum and Extreme–high Vacuum Employing a Hydrogen Absorber
G.A. Mulhollan, Saxet Surface Science
9:40am VT-MoM5
Investigation of Pumping Combinations to Achieve XHV
M.L. Stutzman, P.A. Adderley, Thomas Jefferson National Accelerator Facility, M.A. Mamun, Old Dominion University, M. Poelker, Thomas Jefferson National Accelerator Facility
10:00am VT-MoM6
Beyond Mercury Manometers: Are Optically-Based Primary Standards for Realization of the Pascal Within Reach?
J.H. Hendricks, J.A. Stone, G.F. Strouse, D.A. Olson, J.E. Ricker, National Institute of Standards and Technology
10:40am VT-MoM8
Reduction of Statistical Scatter of Spinning Rotor Gauge Readings by Operation at Higher Rotational Frequency
J. Setina, Institute of Metals and Technology, Slovenia
11:00am VT-MoM9
Long-Term Stability of Hot-Filament Metal-Envelope Enclosed Ionization Gauges
J.A. Fedchak, National Institute of Standards and Technology
11:20am VT-MoM10
Non-Destructive Gas Pressure Measurements Inside Sealed Vacuum Devices
R.S. Goeke, T.P. Hughes, Sandia National Laboratories
11:40am VT-MoM11
Vacuum Gauge Operation in Noisy Accelerator Environments
L. Smart, Brookhaven National Laboratory