| AVS 65th International Symposium & Exhibition | |
| Advanced Ion Microscopy Focus Topic | Thursday Sessions |
| Session HI-ThA |
| Session: | Emerging Ion Sources, Optics, and Applications |
| Presenter: | Xiaomo Xu, Helmholtz Zentrum Dresden-Rossendorf, Germany |
| Authors: | X. Xu, Helmholtz Zentrum Dresden-Rossendorf, Germany G. Hlawacek, Helmholtz Zentrum Dresden-Rossendorf, Germany H.-J. Engelmann, Helmholtz Zentrum Dresden-Rossendorf, Germany K.-H. Heinig, Helmholtz Zentrum Dresden-Rossendorf, Germany W. Möller, Helmholtz-Zentrum Dresden-Rossendorf, Germany A. Gharbi, CEA-LETI, France R. Tiron, CEA-LETI, MINATEC, France L. Bischoff, Helmholtz Zentrum Dresden-Rossendorf, Germany T. Prüfer, Helmholtz Zentrum Dresden-Rossendorf, Germany R. Hübner, Helmholtz Zentrum Dresden-Rossendorf, Germany S. Facsko, Helmholtz Zentrum Dresden-Rossendorf, Germany J. von Borany, Helmholtz Zentrum Dresden-Rossendorf, Germany |
| Correspondent: | Click to Email |
We present an approach to mitigate the ion beam induced damage inflicted on semiconductor nano-structures during ion beam irradiation. Nanopillars (with diameter a of 35 nm and height of 70 nm) have been irradiated with either a 50 keV Si+ broad beam from an implanter or a 25 keV focused Ne+ beam from a helium ion microscope (HIM) . Upon irradiation of the nanopillars at room temperature with a medium fluence (2e16 ions/cm2), strong plastic deformation has been observed which hinders further device integration. This differs from predictions made by the simulations using TRI3DYN. However, irradiation at elevated temperatures with the same fluence would preserve the shape of the nanopillars.
It is well known that a critical temperature exists for silicon above which it will recrystallize during ion beam irradiation. This prevent s the amorphization of the target material independent of the applied fluence. At high enough temperatures and not for too high flux this prevents the ion beam hammering and viscous flow of the nano-structures. These two effects are responsible for the shape change observed at low temperature. This has been observed previously mainly for swift heavy ions and energies higher than 100 keV. We used HIM and transmission electron microscopy to follow the morphological evolution of the pillars and their crystallinity. While irradiation at room temperature results in amorphization and the related destruction of the nanopillars, irradiation above 650 K preserves the crystalline nature of the pillars and prevents viscous flow. This effect has been observed previously mainly for swift heavy ions and energies higher than 100 keV. Such high-temperature irradiation, when carried out on a nanopillar with Si/SiO2/Si layer stack, would induce ion beam mixing without suffering from the plastic deformation of the nanostructure. Due to a limited mixing volume, single Si-NCs would form in a subsequent rapid thermal annealing process via Oswald ripening and serve as a basic structure of a gate-all-around single electron transistor device.This work is supported by the European Union’s H-2020 research project ‘IONS4SET’ under Grant Agreement No. 688072.