| AVS 57th International Symposium & Exhibition | |
| Tribology Focus Topic | Wednesday Sessions |
| Session TR+NS+SS-WeA |
| Session: | Mechanical & Chemical Effects on Friction and Wear |
| Presenter: | N.A. Burnham, Worcester Polytechnic Institute |
| Authors: | J.R. Pratt, NIST G.A. Shaw, NIST L. Kumanchik, University of Florida N.A. Burnham, Worcester Polytechnic Institute |
| Correspondent: | Click to Email |
It has long been recognized that the angular deflection of an atomic force microscope (AFM) cantilever under “normal” loading conditions can be profoundly influenced by the friction between the tip and the surface. It is shown here that a remarkably quantifiable hysteresis occurs in the slope of loading curves whenever the normal flexural stiffness of the AFM cantilever is greater than that of the sample. This situation arises naturally in cantilever-on-cantilever calibration, but also when trying to measure the stiffness of nanomechanical devices or test structures, or when probing any type of surface or structure that is much more compliant along the surface normal than in transverse directions. Expressions and techniques for evaluating the coefficient of sliding friction between the cantilever tip and sample from normal force curves, as well as relations for determining the stiffness of a mechanically compliant specimen are presented. The model is experimentally supported by the results of cantilever-on-cantilever spring constant calibrations. The cantilever spring constants determined here agree with the values determined using the NIST electrostatic force balance within the limits of the largest uncertainty component, which had a relative value of less than 2.5%. This points the way for quantitative testing of micromechanical and nanomechanical components, more accurate calibration of AFM force, and provides nanotribologists access to information about contact friction from normal force curves [1].
1. J. Appl. Physics 107, 044305 (2010), doi:10.1063/1.3284957