AVS 54th International Symposium
    MEMS and NEMS Tuesday Sessions
       Session MN-TuM

Paper MN-TuM11
Microfluidic Transport Control Using Remotely Powered Semiconductor Diodes

Tuesday, October 16, 2007, 11:20 am, Room 615

Session: Integration and Packaging in MEMS/NEMS
Presenter: D.N. Petsev, University of New Mexico
Authors: D.N. Petsev, University of New Mexico
S.T. Chang, North Carolina State University
O.D. Velev, North Carolina State University
V.N. Paunov, University of Hull, UK
Correspondent: Click to Email

The precise control of fluid transport in microchannels is of paramount importance for the successful design and operation of fluidic devices. We have recently demonstrated1 that using miniature diodes embedded in the walls of fluidic microchannels in combination with AC field is a very simple and convenient tool to manipulate the flows in microchannels. Our focus is on two particular problems briefly described below Mixing. Due to the low Reynolds number of microflows, mixing of components is a real challenge. Due to the laminar character of the flow different solution tend to flow side by side and the only way for solutes to cross the streamlines is by diffusion. Using properly (anti-parallel) oriented diodes, placed alongside the channel walls, allows generating a vortex fluid motion by simply turning on a properly connected Alternate Current (AC) field source. Such vortex dramatically improves the mixing in the microfluidic device. Another advantage of this approach is that such diode mixer can easily be turned on and off through the AC field power source. Separation. Using parallel oriented diodes and a combination of AC and Direct Current (DC) fields in a loop-shaped channel allows complete decoupling of the fluid electroosmosis from the analyte electrophoresis. Balancing the electrophoretic and convective forces on the different analytes allows for a very easy and efficient separation. The parallel oriented pair of diodes, powered by the applied AC field, acts as a miniature pump and drives the fluid in a circulatory motion in the loop shaped channel. Any charged analytes, however, will not migrate in the AC field. Applying DC field to the fluidic device will not drive the fluid motion because this particular design (closed symmetric loop) cancels the electroosmotic driving force. Hence, combining the two fields (AC and DC) allows decoupling of the fluid flow from the particle electrophoretic migration.

1S. T. Chang, V. N. Paunov, D. N. Petsev and O. D. Velev, "Self-Propelling Microdevices and Microfluidic Pumps Based on Remoutely Powered Miniature Semiconductor Diodes, Nature Materials, 6 (2007) p. 235.