| AVS 61st International Symposium & Exhibition | |
| Nanometer-scale Science and Technology | Monday Sessions |
| Session NS+SE-MoM |
| Session: | Delivering Energy and Mass at the Nanoscale |
| Presenter: | Gregory Meyers, The Dow Chemical Company |
| Correspondent: | Click to Email |
Scanned probe microscopy (SPM) has had a long history at The Dow Chemical Company, beginning in the late 1980s when commercial scanning tunneling microscopes were just hitting the market. Since that time Dow has invested in internal and external collaborative efforts to drive and develop atomic force based technologies for property measurements of polymeric materials at nanometer length scales.
Our most cited early work described a unique phenomenon of surface wear of polystyrene thin films where the interaction of a sliding AFM tip lead to characteristic patterns that depended on the polymer molecular weight. Since that time work such as this has been studied in order to understand elastic, adhesive, and thermal properties of polymer coatings and films near rigid interfaces. Collaborations with NIST in the late 1990s provided our first attempts at quantifying mechanical properties at the nanoscale, combining knowledge gained from classical nanoindentation to the calibration of AFM systems for quantitative AFM based indentation. This work set the stage for a large scale effort in the latter 2000 time frame, funded by the NIST-ATP program in collaboration with Veeco Instruments (now Bruker-Nano). The objective of this program was to develop an AFM based platform for quantitative modulus measurements of polymers at sub 100 nm length scales, to provide better than 10% precision for polymer materials with bulk properties in the 10 MPa to 10 GPa range. As a result of this program, we now have quasistatic AFM based indentation capability that provides the most comprehensive suite of analytical models (elastic, elastic-plastic, and adhesive) to interpret material properties at these scales. Within the last few years the ability to map properties at high spatial resolution via high speed AFM indenting has been realized. A key consideration in all of the mechanical probing is the time scale over which the tip-surface interaction occurs and so we have looked to computational simulations with Purdue University to study the role of dissipative factors – viscoelasticity and surface adhesion hysteresis – to help interpret our measurements.