AVS 61st International Symposium & Exhibition
    Electronic Materials and Processing Thursday Sessions
       Session EM1-ThM

Paper EM1-ThM6
Suppressing Optical Absorption in Nanostructured Metal Electrodes in Photovoltaics

Thursday, November 13, 2014, 9:40 am, Room 311

Session: Materials for Light Management
Presenter: Samuel Clark, University of New Mexico
Authors: S.M. Clark, University of New Mexico
S.E. Han, University of New Mexico
Correspondent: Click to Email
Electrodes are ubiquitously used in optoelectronic devices such as solar cells, infrared detectors, and light emitting diodes. Typically, metals exhibit good electrical conductivity due to their free electrons and are suitable for electrodes in these devices. However, metal electrodes cause inefficiency in the devices by absorbing light as their free electrons suffer from collisions. To circumvent this problem, nanostructured metals are being explored to realize low optical losses while maintaining large electrical conductivity. Here, we study optical absorption in helical metal nanocoils and find that absorption can be dramatically decreased when the metal is suitably nanostructured. Theoretical modeling showed that this effect is due to the increase in effective mass of free electrons in nanostructured metals. Heavy electrons suffer a decreased rate of collision and emulate dielectric materials where optical losses are negligible. Calculations showed that, when metal electrodes are used in semiconductor devices, suitably chosen nanostructures can increase the fractional absorption in semiconductors more than 60 times by reducing losses in the metal. Further, we show that a two-dimensional analogue to nanocoil, namely serpentine structure, exhibits optical losses of less than 7 % in the infrared even at a large metal area fraction of 0.3. We will discuss the different physics of optical losses between the coil and the serpentine structures.