Paper SS1+PS+TF+AS+NS-TuA8
Direct Local Deposition of High-Purity Pt Nanostructures by Combining EBID and ALD

Tuesday, November 10, 2009, 4:20 pm, Room C1

Due to its ability to directly deposit nanostructures with sub-10 nm lateral dimensions electron beam induced deposition (EBID) has the potential to become a key nanomanufacturing technology. The technique suffers however from incomplete decomposition of the precursor gas and consequently a low material purity. Platinum EBID yields typically only a purity of ~15 at.% and a resistivity value orders of magnitude higher than bulk resistivity which reduces the functionality of the material for most nanoprototyping applications such as adding electrical contacts to nanodevices. In this contribution we propose a novel approach for the fabrication of high-purity Pt nanostructures based on a combination of the patterning capability of EBID and the high material quality obtained by atomic layer deposition (ALD). The latter technique yields submonolayer control of the film thickness and in the case of Pt ALD high purity (~100%), low resistivity (13±1 µΩcm) films [1]. The developed approach comprises seed layer deposition by EBID and area-selective ALD growth. For specific conditions the thermal ALD process of Pt (MeCpPtMe₃ precursor, O₂ gas) was found to start selectively on an EBID seed layer with a thickness equivalent to one monolayer Pt. It was established that the deposits have a uniform thickness and a high purity value (>93%), whereas the method has the potential to achieve sub-10 nm lateral dimensions. In addition to the approach and the material properties the underlying reaction mechanism of the (area-selective) Pt ALD process will be discussed, including aspects such as the role of dissociative chemisorption of O₂ molecules on Pt and the formation of H₂O, CO₂, and CH₄, reaction products.