| AVS 64th International Symposium & Exhibition | |
| 2D Materials Focus Topic | Monday Sessions |
| Session 2D+EM+MI+MN-MoM |
| Session: | Properties of 2D Materials including Electronic, Magnetic, Mechanical, Optical, and Thermal Properties |
| Presenter: | Bo Ni, Brown university |
| Authors: | B. Ni, Brown university H.J. Gao, Brown University |
| Correspondent: | Click to Email |
It has been claimed that graphene, with the elastic modulus of 1 TPa and theoretical strength as high as 130 GPa, is the strongest material. However, from an engineering point of view, it is the fracture toughness that determines the actual strength of materials, as crack-like flaws (i.e., cracks, holes, notches, corners, etc.) are inevitable in design, fabrication and operation of practical devices and systems. Recently, it has been demonstrated that graphene has very low fracture toughness, in fact close to that of ideally brittle solids. These findings have raised sharp questions and are calling for efforts to explore effective methods to toughen graphene. Recently, we have been exploring the potential use of topological effects to enhance the fracture toughness of graphene. For example, it has been shown that a sinusoidal graphene containing periodically distributed disclination quadrupoles can achieve a mode I fracture toughness nearly twice that of pristine graphene. Here we report working progresses on further studies of topological toughening of graphene and other 2D materials. A phase field crystal method is adopted to generate the atomic coordinates of material with specific topological patterns. We then perform molecular dynamics simulation of fracture in the designed samples, and observe a variety of toughening mechanisms, including crack tip blunting, crack trapping, ligament bridging, crack deflection and daughter crack initiation and coalescence.